Tue 03 January 2006 |
| Today got back to the project for a proper half day. Continuing with 'bits' I went back to the rear tail light. The basic problem is the two small (#4) screws / nuts are almost impossible to install. | 
|
| The best option that we could come with was for a AL base, remove most of the fibreglass, and soldered a core of copper on the two nuts to stop them rotating. | 
|
| I mixed up a stiff batch of silica resin and bonded the two halves together. Hopefully the boelube on the screw threads will provide a release agent. We shall see....... | 
|
