Home | Research | Delivery | Empennage | Wings | Fuselage | Finish | Engine | Electrical | GRTDecode

Sat 07 January 2006

Starting with the wing tips today - the flox along didn't seem that strong so I added 4 rivets along each length.
Continuing with the resin work, a half batch for silica and the wing tips, the second half batch for one side of the lower rudder tip.
Dad was back on project today and returned to the spinner. A jig was made to re-drill the locations as the previous attempts were 'non-perfect'.
These were then used for the spinner locations and the nutplates were drilled.
Finishing up I continued with the wrestling for the quadrant mounting. I think the mount is sorted, the problem is making the bracings presentable in the cockpits.
Also sorted the 5th harness point nutplate locations.
Carl Morgan