Tue 24 January 2006 |
| I was up and onto the project early and spent a couple of hours finishing the sanding of the RHS upper cowl. Palm sander, plus by hand with 60/80 grit and then 150. | 
|
| After Dad had reviewed the lines, we modified the lower / forward profile slightly. Then I started layering some electrical tape on the masking edge, this will be used to sand back to whilst protecting the plexi. | 
|
| Also started to think about the fibreglass lay-ups and how we want to do the forward corners. We might end up going significantly further forward than the current yellow tape / line. | 
|
| We got side tracked with some other non-plane stuff, took the rest of the day, but at least we enjoyed the sunshine. | |
