Home | Research | Delivery | Empennage | Wings | Fuselage | Finish | Engine | Electrical | GRTDecode

Mon 10 April 2006

Had an email back from Stein (I know he was still at the Sun-n-Fun show) - lots of apologies and sounds like we are back on track. One announcement from Sun-n-Fun is the IFR (TSO'd) internal GPS for the GRT systems - I might change over to that as it was missed from the shipment - more thought needed. 
I started looking at the Garmin avionics stack mounting and supports. After some reading and CAD work I set the mill drill up and attacked a bit of AL angle.
Also did a plate for the rear side.
The first cut - looks promising, the alignment of the front facias is pretty good, but could be tweaked, and I used #8 tapped locations rather than the correct #6 screws so that will need re-working anyway.
Carl Morgan