Sat 27 May 2006 |
| Getting frustrated with the lack of progress on the annunciation problem, I changed for something different. The lower panel bar is slightly further aft now, so the end plates need re-making, not particually difficult but good to actually move forward on something. | 
|
| Another item on the list is the cut out in the forward sub panel for the avionics stack. I've decided to make a stiffener / plate, this is designed to go around the SL30 and GNS430. The dual vice system worked well again. | 
|
| Amazingly it worked and fitted first time! Now I just need to get this mounted / aligned in the right location on the sub-panel. | 
|
