Sun 11 June 2006 |
| Continuing with the fariings theme, Dan (and other reports) have commented on the rivets working over time on the rear hinges. To try and stiffen any finishing / paint work I've decided to add a single layer of 2oz cloth over the aft halve of the sides. I used the masking tape method as a trim line. | 
|
| Normal sort of f/g process, I used a folded strip of grease proof paper between the two edges to stop them being glued together. | 
|
| One side of the nose leg fairing was also done and peel ply added to all the surfaces to help remove the excess resin. | 
|
