Started today by tidying up and sanding flat the elevator couter weights
Then moved onto some more cutting on the panel. The TruTrack autopilot head arrived last week with the Stein part 2 delivery. I couldn't find any offical details on the mounting dimensions so just went with measurement and then a test cut. (For reference, 2.52" for the main cutout, #6 on a 2 and 5/8 between centers).
Then onto the real panel. Also increased the clearance on the AoA cutout and EIS buttons. They already 'fitted' but a paint layer would have been too much - extra .4mm gap now.
