Home | Research | Delivery | Empennage | Wings | Fuselage | Finish | Engine | Electrical | GRTDecode Wed 11 Oct | Fri 13 Oct

Thu 12 October 2006

Dad and I worked through the FADEC harness which resulted in some quesitons - the actual harness doesn't quite match the published documentation. Questions have been sent to AeroSance.

Update: The harness is correct, although it has 2 un-needed extra lines (Fuel Pump Light Lo, Power Sense B), the power pin layout documentation is wrong in places, but works as it should.


Continued with various bits of wiring, currently considering moving the magnetometer cables to keep apart from the COM antennas - but it is difficult in the small space we have to work in.
Moving onto to the wing wag units I sorted some of the leads and setup a test rig to try the progressive Off,Taxi,Landing light + Wing Wag Off/On combination. Should work ok, but will need diodes to prevent back feed power through the wing wag unit.
Home Carl Morgan Wed 11 Oct | Fri 13 Oct