Fri 20 October 2006 |
| Woke up in the middle of the night and realised I'd made a mistake with PushToTalk lines. It needs to be split out for the stick PTT, so undo the GMA340 shells again and reterminate and solder additional lines in. | 
|
| Whilst access was available I also increased the access hole to the back of the audio panel. | 
|
| By dropping the cross bar down, I gained access for the 3 nutplate locations which will hold adel clamps for the main bundles of wire. Drill, dimple, rivet. | 
|
