Mon 06 November 2006 |
| The EL lighting strip comes some 'simplistic' electrical connections. I decided to remove and reterminate completely. A couple of new 1/8" tags soldered on. Also opened a 'slot' between the plastic and AL backing. This was then drilled and dimpled. | 
|
| I twisted the AC supply lines and then squeezed a couple of AD4-426's. The flush rivets should mean it lays nicely on the upper surface of the canopy combing. | 
|
| Also modified the data lines for the MFDs so that both have a direct GPS Aviation feed from the GNS430. | 
|
