Home | Research | Delivery | Empennage | Wings | Fuselage | Finish | Engine | Electrical | GRTDecode

Sat 23 December 2006

Short day - remounting the flaps and also increased the trimming of the upper inboard edges.
Also back to a problem that we knew about with the flap travel. With the stock standard length pushrods, the flaps go too far down (about 47+ degrees) which results in the skin 'popping out' of the wing trailing edge. Obviously this would not work hence the up microswitch system, but I would like to resolve with the geometery if possible.
Carl Morgan