Home | Research | Delivery | Empennage | Wings | Fuselage | Finish | Engine | Electrical | GRTDecode

Tue 27 March 2007

Continuing on from yesterday fibreglass session, I did some clean up / mounting of the plenum bubbles and then prep'ed and put the first layup on the VS tip and dressed the inner surface of the nose wheel pant.
The temps today meant things were setting reasonably quickly so I also managed to get a second glass session to re-mount the main axel brackets on the nose fairing. This time I used a simple 6 oz, thick flox and 2 oz cover and just cleco'd the brackets.
Carl Morgan