Mon 02 April 2007 |
| Another day - more fibreglass. | 
|
| This is hopefully the last glass layup on the nose fairing - the little cover ramp seems to be working out well. | 
|
| Also made a mini guide for cables going into the rudder fairing - the snap bush was a bit too tight. It will make more sense when we install it.... | 
|
| To finish the day I got the prop back out, mounted up the spinner backing plate. | 
|
| And went through the half turn at a time, for 6 bolts... slow but not hard. | 
|
| One of the primary reasons for getting the prop back on was to test getting the lower cowl on and off. It doesn't! More cut outs in the nose leg fairing are going to be needed, but not something to rush into. | 
|
