Home | Research | Delivery | Empennage | Wings | Fuselage | Finish | Engine | Electrical | GRTDecode

Sat 16 June 2007

Laid out and twisted the multi core cable bundle for the LED panels. Dog comb worked well for keeping the tangling to a minimum.
Wired up for testing - looks good. Currently using white paper as the mask, provides a good dead facing solution, but intensity of colour is a little less than I would like. More research / would like to try a translucent mylar if possible.
The finished 3x2 board from the side, you can see the PCB, carriers, LEDs, standoffs, paper mask, plexi-glass sandwich.
Carl Morgan