Wed 19 September 2007 |
| Start looking at the ANR upgrades, the starting donor headset. Mono 13.4 DCs - very comfortable, but no ANR. | 
|
| Gel ear pads removed, inserts out, foam support out. That leaves a couple of screws holding the speaker assembly. | 
|
| The DC speakers are all screw terminals. | 
|
| The mic boom / ear cup. | 
|
| The AL clips used to prevent the cable pulling out required cutters and were tougher than I expected. | 
|
| The new ANR parts - pink confa for, dual speaker module and felt cover. | 
|
| All the parts laid out. | 
|
| The RHS speaker assembly with top band cable. | 
|
