Home | Research | Delivery | Empennage | Wings | Fuselage | Finish | Engine | Electrical | GRTDecode

Sat 14 January 2006

Half day with some social time in the afternoon, but first thing got the RHS wing tip in shape.
Dad continued with mark up and shaping of the empennage fairing.
Then the wind dropped completely, so I switched modes and got ready for spraying.
The only remaining spraying for the canopy frame before the plexi can be installed is the forward deck. I masked up with sheets and gently rubbed the previous grey top coat down a little.
All the top coat paint we are using is Acrylic based and mixed 1:1.5 solvent for spraying.
The result of all the masking, the actual spraying was about 3 minutes duration.....
The result after removing the masking - all looking good so far.
Carl Morgan