Home | Research | Delivery | Empennage | Wings | Fuselage | Finish | Engine | Electrical | GRTDecode

Mon 20 March 2006

One item that has been on the list was the rudder cable alignment. The solution was to tweak the rudder pedal weldment. This helped the 'left/right' alignment, but the RHS still seems to be slightly high. Not sure the best solution yet.
Started looking at the gear leg fairings. I duplicated the DWG templates and marked out the fairings. The trailing edge is bigger than the template - but at this point I've left it.
For the main fairings I've been able to cleco the rear edge, and I've pre-drilled hinge.
Carl Morgan