Home | Research | Delivery | Empennage | Wings | Fuselage | Finish | Engine | Electrical | GRTDecode

Thu 05 October 2006

I started with some bits - re-installed the 4 adel clamps in the main tunnel - fiddly but simple.
Then tied up various cable bundles with lacing cord, I'm using lacing rather than plastic wraps - a little more work, but light and simple.
With the stick grips now the 'right' size, I sorted the trim / PTT wiring.
I'm reusing some of the GRT EIS harness that isn't needed. These are pre-terminated and colour coded.
Dad sorted a stiffener plate for the P1 push/pull cables
I roughed out the stick installation. The P2 stick needed a little more trimming - the bolts and washers also need re-looking at.
Carl Morgan